N-Log to Rec.709
Free Nikon Z6II LUT (N-Log to Rec.709)
Turns the Z6II's N-Log / N-Gamut footage into normal-looking Rec.709 video. One .cube LUT, free for any project, no email.
The zip holds the same LUT twice: a 65-point file for editing, and a 33-point file for monitoring on a camera or in an app, or for older apps that won't load the larger one.
Built from Nikon's published spec and checked against Nikon's own LUT.

N-Log, as recorded

With the LUT
The LUT converts N-Log with N-Gamut color, as the manufacturer publishes them, into Rec.709 through the ACES 2.0 output (SDR, 100 nits).
Built from: Nikon, N-Log Specification Document.
Set up the Z6II
- N-Log is HDMI output only: in the camera's HDMI output options set Output data depth = 10 bit, then N-Log/HDR (HLG) output options = N-Log. It records only on the external recorder, not to the camera's card.
- Minimum ISO for N-Log output: ISO 800 in mode M; Maximum sensitivity can't go below ISO 1600.
Exposure
Nikon's Log-Format/RAW Technical Guide: for N-Log, expose an 18% grey card to about 35% on the waveform (10-bit code value around 372).
Sources
- onlinemanual.nikonimglib.com
N-Log over HDMI needs 10-bit output; recorded to the external device only; minimum ISO 800 (mode M) and 1600 (max sensitivity)
- nikon.com
Z6II announcement, October 14 2020: N-Log with 10-bit output, recorded only to an external device
- downloadcenter.nikonimglib.com
N-Log LUT v2.00; Z 6II listed
- onlinemanual.nikonimglib.com
N-Log exposure target