N-Log to Rec.709
Free Nikon Zf LUT (N-Log to Rec.709)
Turns the Zf's N-Log / N-Gamut footage into normal-looking Rec.709 video. One .cube LUT, free for any project, no email.
The zip holds the same LUT twice: a 65-point file for editing, and a 33-point file for monitoring on a camera or in an app, or for older apps that won't load the larger one.
Built from Nikon's published spec and checked against Nikon's own LUT.

N-Log, as recorded

With the LUT
The LUT converts N-Log with N-Gamut color, as the manufacturer publishes them, into Rec.709 through the ACES 2.0 output (SDR, 100 nits).
Built from: Nikon, N-Log Specification Document.
Set up the Zf
- Video recording menu: Video file type = H.265 10-bit (MOV), then Tone mode = N-Log. Internal recording.
- Minimum N-Log ISO is ISO 800 (mode M). Firmware 'C' 2.00 added Lo 0.3-Lo 2.0 (about ISO 640 down to ISO 200 equivalent), which cuts highlight headroom. For those settings Nikon suggests a zebra highlight threshold of about 230 (Lo 0.3-1.0) or 200 (Lo 2.0).
Exposure
Nikon's Log-Format/RAW Technical Guide: for N-Log, expose an 18% grey card to about 35% on the waveform (10-bit code value around 372).
Sources
- onlinemanual.nikonimglib.com
N-Log needs H.265 10-bit; mode M minimum ISO 800; max sensitivity min 1600; 12 stops at ISO 800
- onlinemanual.nikonimglib.com
Lo 0.3-Lo 2.0 (ISO 640-200 equivalent) for N-Log; zebra threshold advice
- onlinemanual.nikonimglib.com
Low ISO for N-Log was added in 'C' firmware 2.00
- downloadcenter.nikonimglib.com
Older N-Log 3D LUT v1.06 added Zf support
- downloadcenter.nikonimglib.com
Current N-Log LUT v2.00; Zf listed
- onlinemanual.nikonimglib.com
N-Log exposure target
- nikon.com
Zf announcement, September 20 2023